How to Glue RC Car Tires for Maximum Performance

July 8, 2024

Gluing tires for RC cars is an essential skill for performance enthusiasts. Understanding how to glue RC car tires can greatly improve the longevity and efficiency of your RC vehicle. This article will guide you through the process, focusing on key steps such as preparation, choosing the right materials, and proper gluing techniques.

Materials and Preparation

To start, you'll need the following materials: thin CA glue, shop towels, cleaning agents like Sticky Kicks or VP Power Wash, and tire bands. For our example, we'll use PR blockade M3 tires and AKA closed cell molded inserts, preferred for their fit and durability. Begin by trimming the foam inserts at an angle to ensure they fit adequately into the tires.

how to glue rc car tires

Cleaning and Prepping the Tires

Cleaning is a critical step in learning how to glue RC car tires. Use shop towels and cleaning agents to remove any mold release or other agents on the tires. Ensuring both the tires and rims are dry and clean will facilitate better adhesion when the glue is applied.

Inserting the Foams

After cleaning, insert the trimmed foam inserts into the tires, ensuring they're evenly distributed. Massage the foam to align it properly within the tire, as misalignment can affect performance.

Applying the Glue

When it comes time to glue, use thin CA glue for precision. Here's how to glue RC car tires effectively: Pull back the tire bead from the rim channel and apply a small amount of glue. Work your way around the rim, evenly distributing the glue. Use rubber bands to hold the tire in place while the glue cures. Repeat this technique for both sides of the tire for added strength and reliability.

Drying and Curing

Allow the glued tires to dry fully. This usually takes about 8 to 10 minutes, but letting them cure overnight is advisable for optimal bonding. Be cautious with the thin CA glue as it's very strong and can stick almost anything together quickly, including your fingers.

Tips and Tricks for Beginners

If you're new to RC car maintenance, start gluing on the back side of the tire to minimize visible errors. Ensure you don't get glue in the foam holes, as this can affect the foam's performance. Quality rubber bands and dental tips can offer precise application and strong bond security.

Thank you for reading. Discover more engaging articles like this on our homepage, and be sure to follow us on our social media platforms for updates and more content.

Leave a Reply

Your email address will not be published. Required fields are marked *

Mission

Traffic Dave is on a mission to help traffic engineers, transportation planners, and other transportation professionals improve our world.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram